Think about the differents uses they provide you : — The 19u can be a good secondary monitor when you are not using it for drawing. Now if you never tried any tablet monitor in your life, I can advise you to try to find someone around you or a shop with demo devices that possess one of them cintiq, tablet pc, samsung note That can give you an hint about your need of a tablet monitor. In France and USA you can return the device and get a full refund if you are not satisfied by your purchase within 7 days after purchase.
You can send an email to your amazon. Re your Intuos4. Thank you. I checked them out before but never the hackaday website. They r really interesting but the thing is that my wacom wirless is like medium size, so i would need like a really small screen.
Product Design. Two: Area of expertise? And the next question. Can you build models or the final product? Do you plan to work for yourself or someone else? What are you going to do? This product lots very promising! Lots of softwares here! OpenCanvas version 5. MangaLabo version 1. I basically was changing my parameters and then taping in the working surface before doing a stroke. Blender : I never used this one, I was desperatly searching for an UVs tool or something similar to paint on the object and finally found a anotation tool.
So I just tried it. The stylus works fine for everything and it registers pressure. I will look for a tutorial about texturing or so to make a more complete test, but I think it will be okay. Krita : I encounter big issues with this one. Inkshape : It works in extended screens mode.
Krita again : Managed to make it works for a few moments before it stops registering brush and crash. I cannot be sure about what works as intended and what comes from my personal issue with it. For the short duration of time it was running well I see no lag. It works only in duplicate screen mode. Some brush have an issue when I put the stylus on the screen before applying any pression, it register it as a full pression.
Thanks a lot for testing them out for me! It helps them in getting Krita stable! Also, can you please describe the viewing angles a little more? I plan to use the MSP19U flat on the table while drawing, like how we used to on paper. If you put the yiynova flat on a table, you will have no problems working on it but if you stand up and stand back, you will see the dark angle appear. Thanks a lot again! Just asking, did you test Krita 2.
It is the most stable version for Windows and you should get better results from it! Also, is it possible for you to check the colour gamut and accuracy of the MSP19U? Diagrams would be helpful as well! I do not have any third party hardware to test the colors unfortunatly. The cursor really stick where the pen is, no interval on the side. Do you mind letting me know what arm did you buy for it?
I am afraid that when going above pressure the screen would be pushed, how stable is it? Thank you very much! This one is for light screens. I can rest my arm on it and even push it without making it move.
You can adjust the arm to be more or less difficult to move. I was just wondering, does your yiynova msp19u pen move kinda sticky? I have been uninstalling and reinstalling drivers, playing with options, trying to get rid of the HID generic drivers but that just rendered the pen useless… aaaall day trying to fix this problem.
Also windows7 keeps installing its own drivers for it. I did everything correctly, rebooted it after it was installed, shut it off, plugged in the yiynova, and then again. Lastly, my pen utility software keeps going back to default everytime i restart my computer. Is that the same issue with you? Wow, thank you so much! I have the msp19U and I really really appreciate the reply.
I will keep trying to find an answer. May I ask as to whether you only installed the driver from the yiynova site? With the msp19, i know you had to install stuff from waltop. I hope i get it working to the point of what I see everyone else being able to do on youtube with their yiynovas. I have been trying to work with it all day but it is exasperating. But before! Did you try with another one if possible? My computer is quite old, only run 4 go RAM and sometime I got lag in photoshop because of that.
I have the last drivers from yiynova website, as you did. But be carefull, you will need to re-install the drivers if the software do not find them path are broken by uninstall but files remain in windows backup drivers list. That can be enough, you will have to un-install the current drivers wacom I guess? You will get no pressure sensitivity, but you can look at how the lag is. If there is no lag, then it come from a drivers fight and we can investigate a little more.
Your problem sound more like a drivers or instalation issue than an hardware issue, but if needed, do not hesitate a second to contact PandaCity! They are kind, even when busy and will help you the best they can. If your unit is faulty, they will exchange it, on this point I think they are really okay. I definetly have the msp19u and I think you mentioned about software that help you uninstall the wacom table software?
I think that might or might not be the issue. I have been manually searching my computer for the tablet. DAT and wacom. DAT or whatever their names are files but it is nowhere to be found. Should be used only if you have a backup or a restore point near! It turned out to simply be the pen! And thank the gawd it is because it would have been horrible sending the whole tablet back.
I changed the nib just for the heck of it, restarted the computer because i unplugged the yiynova and had to plug it back in, and it worked perfectly!!!
So rewarding! Thank you so much. I literally got off my seat and started jumping up and down, i was so relieved. It has been over a month now, is it possible for you to update the status of the softwares OpenCanvas and Krita? Are certain problems fixed?
And, is there any issues with the MSP19U like scratched screen, buggy drivers, spoilt wiring, etc. I just tried OpenCanvas latest version. Still working very nicely, but only in duplicate screen mode. On the hardware part, the tablet is like it was at first day. No scratches, no dead pixels, I keep my fingers crossed it continue this way!
A little note I have to add. I recently bought a tabletPC with a wacom digitizer so I have to tell about the drivers comparison : the yiynova never bugged, nor lost pressure sensitivity, nor lost track of the pen while I was using it. It happen from time to time, especially in photoshop, whatever you are doing. On this point I have to say since I have the yiynova I never experienced something similar. To be honest, I never experienced a weird action from my cursor or an unexpected brushes stroke.
I managed, no idea how, to make the 2. It will crash at the end, not matter what, even if it work for a few time. So after browsing here and there, I think that come from a drivers compatibility. That can be corrected, I read some user with other brand tablets wrote some fix for them. Hope that can be fixed! Hello, can you test this out with Toon Boom Animate Pro 2?
I have a windows system and this tablet works excellent in Flash but I can not get it to perform in Animate Pro 2. Sure I can run a test, do you have a link to a trial version? Yes thats it. I got an email from support saying this program only works in single monitor mode. They are working on a fix in the next driver update.
Apparently, the same issues are taking place in sketchbook and sai. It happen for My Paint and OpenCanvas too. They are some softwares that seems to be made in some way they react like that. That would solve a lot things! Ok for sure going to try it when I get home today. Excited because toon boom is THE animation program and the only reason I bought the msp19u so my drawings could be better.
Hi there! Any ideas? Trying to get as many suggestions as I can. I want to play with it so much, but this jumping is getting me down. Huum well jumping cursor, even when not in art program? Did you downloaded the latest drivers version from Yiynova website? I had the same thing happen when I first got mine. I ended up uninstalling and reinstalling and have not had that problem ever since. Try it and see if it works. I think I am one of the ones who contacted Bosto re a what if scenario re an OSX driver for their 19 incher.
Data sheet wise. Begin with a driver for OSX. Make one that plays nice. As for a hardware hack. Bends like paper. Put that on your Yiynova me thinks and next to no more parallex. At least in theory. How much can such a sheet cost? Nice idea if it works… Cheers everyone.
As in more than one screen going. Last week Adobe came out with a wonderful earnings report. BP Bob Mansfield head of technology. Question is. No one knows what mister Flash etc will be doing at Apple. But that now seems to be water under the bridge. What next.
Do you have a direct link to a trial? Yes I would like to see a test of Houdini too, and all in the context of multiple monitors, three ideally. I tried the paint tool inside it to see if the pressure sensitivity was okay, but for some reason, it was working randomly. Mari do not works in normal mode. I guess if they fix it for this one, they will fix it for every other softwares.
Thanks so much for checking that software out. The information is very helpful. If you found someone using Animate Pro with the Yiynova maybe that person can answer you better than me. There is some improvement though but not enough to get Mari working on dual screen. Maybe the next one… this drivers corrected some glitch remaning in other softwares.
I just looked into the upcoming yiynova mvp22u — very exciting: Hopefully the driver is up to scratch. They searched for month and finally came up with a solution. I have an half good new for you! The new drivers is up 5. No more strange behavior. Panda City and lots of other yiynova reseller offer full refound and there are plenty of reviews now everywhere arround the internet for those who are interested. Remember Wacom still have bug about loosing pressure sensitivity, soleace, loosing cursor track… They produce tablets and cintiq since 20 years and still have issues.
My friend. Do yourself a favor:- Compare the definition for lose vs loose, and losing vs loosing. Re young company. Are they from China or Taiwan? The market is obviously pent up and there as yearning has proved. No need for incremental thinking. Getting back to yearning and the market etc.
Future revenue is not going to be a problem. And I know. Creating drivers is a challenging thing. As for the kids… Would you like me to retrieve their names from Amazon and quite them?
It is us who are entering into a relationship with Yiynova and thus we are doing them a favor by giving them our money. As for satisfaction and the Cintiq 24HD et cetera. Is that a bet!? I wish this company and their product growth to do well. Competition means the consumer benefits and has greater leverage as a voice. If Yiynova wants to drag their feet then the void will be filled. Life is Darwinian especially in tech. Personally I think for drawing there will be a tipping point.
The world is quickly moving away from paper etc. The currently transition from the materially analogue practice to the digital methods for image making is very disappointing. Then something will click and the Technolgy will dramatically tip. My feeling is that in this realm the companties should be investing more, doing more and faster. The market is there. The problem is that the users are so apathetic or passive as voices.
Face it. Hey there! Cool review! The one thing I noticed is that when I draw horizontally, I am getting up and down jitter. This is mainly when I draw fairly slowly. I was wondering if you got this to. When you try to draw a horizontal line or diagonal fairly acurately and slowly if that happened to you too. If you could do a small test in photoshop with various thickness of lines. Just draw some horizontal lines across the screen with care and try to keep them as straight as possible.
I get a wavey line that is not very nice. Thanks for the review and I hope you find some time to do this quick test for me. Thank you! The scale effect disappears if you zoom into your image and draw again, slowly or not.
It did not happen with big lines. Do you installed the last driver by the way? That can help solve your issue. Thank you very much for your quick and helpful reply! So as soon as i changed that back to 60 or maybe 65 i cant remember the jitter dissapeared complete. Which was odd but made me happy to find the solution! Now to just get my shaky parkinson hands Under control! The thing is I just downloaded the driver off of their site. It only clicks, and art.
No support for Dual Monitors or Monoprice tablets? It only clicks, but the cursor does not move because this is an orphaned and outdated driver. It took me 7 days of. When I rebooted, my Yiynova defaulted to DVI mode and now it has sharper detail than my main 24 monitor. Today s guest blog post is by Matt Strieby, from.
Warranty will guarantee a cheaper alternative. Update, I purchased another Dell UM monitor. And drivers for the media card reader are not included with the chipset drivers.
Follow the instructions below to install the proper drivers from Dell on your Inspiron I checked the properties of the Base System Device and the only clue i could find was Location, PCI bus 2, device 1, function 3 I'm not sure which driver to install cause I thought i've. In that case i strongly recommend waiting for Ryzen And we don't necessarily need a computer to play with most of them!
Guarantee you a working Toshiba Satellite C45 screen replacement, or your money back. After you upgrade your computer to Windows 10, if your Toshiba Camera Drivers are not working, you can fix the problem by updating the drivers.
I am missing a color? Please check the connection of the VGA. If connected well, the monitor is likely to be defective. Why is the display of my monitor blurred or unfocused? Make sure the monitor is set to run at its true or native resolution. Only the above mentioned resolutions will guarantee a crisp and natural image. LCD monitor only This means the computer is sending an incompatible display mode to your monitor.
Missing Pixels Even though the high standard of production nowadays, the manufacturing process of LCD Displays can not guarantee a pixel-error free display. Most of the displays are manufactured according to the International accepted ISO standard, which generally means that 5 lit or darks sub pixels are allowed.
Please check the documentation supplied with your monitor to find out how many pixels are allowed for your monitor.
0コメント